Heating / pump control integration — reference solution

At a glance

Field equipment: Measurements + actuators
Models to evaluate: YZW800 YZW001L
Target system: Remote supervision

The field challenge

The challenge on site

Remote supervision should fit the way a plant is operated on site. Define the local control sequence, operator permissions and response to lost communication, then integrate the controller, HMI and edge gateway around that process.

Engineering reference design. Final equipment, functions and pilot checks are agreed for your site.

Read the complete application note

System architecture

From field equipment to your application

Follow the data path and see which role belongs to the gateway, controller and customer application.

Heating / pump control integration — reference topology; select to enlarge.

01Measurements + actuators
02Controller / I/O + protective functions
03Edge host + local HMI
04Remote supervision

Integration approach

What the first pilot includes

Agree measurements, actuators, operating modes and control ownership.
Integrate the edge host, controller/I/O, HMI and network from the approved BOM.
Deliver drawings, control sequence, factory checks and site handover records.

PILOT CHECKS

What a working system should demonstrate

Trace each I/O point from the terminal and controller to the HMI.
Verify local operation, loss of communication and the agreed failure response.
Check remote-command permissions and complete the signed handover checklist.

PROJECT INPUTS

What to share with our team

Process description, point list and control sequence
Controller, I/O electrical types, actuator loads and safety responsibilities
Enclosure, thermal conditions, power and installation requirements
Local/remote modes, offline behavior and approved commands

Installation & power

Plan the physical connections.

The reference separates data paths from supply wiring. Confirm actual loads, protection and installation conditions.

Heating / pump control integration — reference power and installation diagram; select to enlarge.

Products for this application

YZW800 and YZW001L are candidate communication/acquisition hosts, not complete control-panel substitutes or safety controllers. The controller, I/O and final panel configuration remain project-defined.